Silicon Light Patch to remove bruises. The kit contains 2 patches (Yellow and Blue), electronic invertor and recharging cord. Use the yellow patch for first few nights to initiate hematoma dissolution and finish the treatment last day by using blue patch to completely remove the bruise.
Lucis Light Patch KIT
1 Instruction for use
1 Electronic Inverter
1 Yellow Patch
1 Blue Patch
1 Charging Cable
The Light Patches (blue and yellow) are
categorised as disposable material. One light
patch has a limited lifetime approximately
2 weeks before the light intensity dramatically
drop down. Light Patch is to be used only for one bruise
treatment. For the next treatment use the
new refill patches with your current electronic
1. Before applying the Lucis light patch, any dressing
and coatings must be removed from the bruise. The
operational time of the inverter is approximately
8 hours and it should be charge before the treatment.
If it is needed, it can be charged during the
2. Plug the patch in the socket at the end of the
0,5m long cable, which goes from the inverter.
Be careful about two pins coming out of the silicone.
Do not wet or bend them, or damage them in any
3. When the bruise is fresh and has a violet
color, use the yellow patch. Attach it
on the skin with stretch net or when the
bruise is on more complicated place, use
kind tape or bandage. Press the button on the
inverter to switch it on and place it on some place,
where it can not be damaged. Use the yellow patch,
until the hematoma dissolves and the bruise turns
4. When the bruise is yellow, apply the blue
patch same way as the yellow. The blue light
decreases the bilirubin level in the blood.
Use the blue patch, until the bruise is gone.